Sylab - Carbon And Sulfur Analyzer - CSBox Tube
CSBox Tube Analyzer is used to determine Carbon and Sulfur in Organic samples. The analyzer provides simultaneous Carbon and Sulfur determination with minimal sample preparation. It consists of two independent IR cells with a wide measuring range of Carbon and Sulfur. The measuring range of each IR cell is modified to the user’s specific requirement to ensure optimum measurement conditions for each application.
Highlight Features:
- High temperature horizontal resistance tube furnace for wide range of sample combustions.
- High throughput. Fast analysis times.
- Measurement across a broad concentration range.
Specifications
| Furnace | Horizontal Tube furnace |
| Heating Elements | Resistance type Silicon Carbide Heating Elements |
| Maximum Temperature | Up to 1500°C |
| Temperature Accuracy | ± 2°C |
| Detector | Non-Dispersive Infrared Detection |
| Measuring Range | Carbon: 0.005 to 100% using 1g to 40 mg Sample
Sulfur: 0.005 to 100% using 1g to 40 mg Sample |
| Analysis Time | 60 Sec to 180 sec |
| Sample Weight | 20 to 2000 mg Nominal Sample Weight is 100 mg (coal) |
| Required Chemicals/ Reagents | Magnesium perchlorate (Anhydrone) Glass Wool |
| General Requirements | |
| Ambient Conditions | 15 to 35°C |
| Relative Humidity | 20 – 80% (not condensing) |
| Power Supply | 230V AC ± 10%; 50/60Hz; 16 A |
| Gases | Oxygen 99.95% purity |
Typical Sample Materials
Coal
Coke
Fuel Oils
Soil
Feed
Biomass
